Impact crusher parts: blow bar


The blow bar is made of high chromium alloy and the latest manufacturing technology. The unique structural design, finished products are cubic, free of tension and crack, and the grain shape is fairly good. It is a reliable high wear resistant casting. When the blow bar is worn to a certain extent, it should be adjusted or replaced in time to avoid the damage of fasteners and other parts.

Adjustment of blow bar: use the hydraulic flip device to open the back cover. Turn the rotor by hand, push the blow bar  which needs adjusted or replaced blow bar to the repair service site, and then fix the rotor. To remove the blow bar locating parts shall be pushed out from the service door in the axial direction or suspended from the middle frame. Need the hand hammer lightly beat when removing.


Hot information

Energy conservation and e ...


Energy conservation and emission reduction is imperative for foundry industry, Environmental protection equipment still needs to be  improved
The foundry industry has bad labor conditions ...
  • Contact us
  • Add:Taohuatu Town Shuangta District Chaoyang City
  • Tel:+86-421-5703588    
  • Fax:0421-5703728

Sweeping attention to mobile terminal site
Copyright:Chao Yang Duo Yuan Alloy Casting Co.,Ltd   ICP filing number:辽ICP备2022008576号-1